BIS強制認證產品清單：

注：以下為BIS強制認證產品清單，共94種。其他為自愿認證，也可申請BIS認證。強制與自愿認證程序相同，認證標志也相同。

水泥類：

1.IS 12269 Ordinary Portland Cement, 53 Grade  普通硅酸鹽水泥，53級印度BIS認證

2.IS 12330 Sulphate Resisting Portland Cement 抗硫酸鹽硅酸鹽水泥印度BIS認證

3.IS 12600 Low heat Portland Cement低熱硅酸鹽水泥印度BIS認證

4.IS 1489 (Part 1)  Portland Pozzolana Cement-Part1 Fly-ash based 粉煤灰硅酸鹽水泥印度BIS認證

5.IS 1489 (Part 2)  Portland Pozzolana Cement-Part 2  Calcined clay based

6.IS 269  Ordinary Portland Cement, 33 Grade 普通硅酸鹽水泥，33級印度BIS認證

7.IS 3466  Masonry Cement 砌筑水泥 污工用水泥印度BIS認證

8.IS 455   Portland Slag Cement 礦渣硅酸鹽水泥印度BIS認證

9.IS 6452  High Alumina Cement for Structural use 結構用高鋁水泥印度BIS認證

10.IS 6909  Super sulphated cement 超硫酸鹽水泥印度BIS認證

11.IS 8041  Rapid hardening Portland cement 快硬水泥印度BIS認證

12.IS 8042  White Portland Cement 白色硅酸鹽水泥印度BIS認證

13.IS 8043  Hydrophobic Portland Cement 防潮硅酸鹽水泥印度BIS認證

14.IS 8112  Ordinary Portland Cement, 43 Grade 普通硅酸鹽水泥，43級印度BIS認證

15.IS 8229  Oil well Cement 油井水泥印度BIS認證

家用電器：

16.IS 12640 (Part-1)  Residual current operated circuit breakers for house hold and similar uses-Part 1 Circuit breakers without integral overcurrent protection (RCCBs) 家用和類似用途的剩余電流操作斷路器,第1部分沒有內置過流保護的斷路器（RCCB）印度BIS認證

17.IS 12640 (Part-2)  Residual current operated circuit breakers for household and similar uses–Part 2 Circuit breakers with integral overcurrent protection(RCVOs 第1部分帶內置過流保護的斷路器（RCCB）

18.IS 13010  AC watt-hour meters, class 0.5, 1 & 2 交流電表，0.5級，1級和2級印度BIS認證

19.IS 13779  AC static watt-hour meters, class 1 &2 交流靜態電表，1級和2級印度BIS認證

20.IS 14697  AC static transformer operated watt-hour and VAR-hour meters, class 0.2s & 0.5s 交流靜態變壓器運行瓦時和VAR小時計，0.2s和0.5s級印度BIS認證

21.IS 15111 (Part 1 & 2)  Self Ballasted Lamps for General Lighting Services - Part 1 : Safety Requirements & Part 2 : Performance Requirements 一般照明用自鎮流燈印度BIS認證

22.IS 302 (Part 2/Sec3)    Safety of household and similar electrical appliances – Electric iron 熨斗印度BIS認證

23.IS 302 (Part 2/Sec201)  Safety of household and similar electrical appliances– Electric immersion water-heaters 電浸水加熱器印度BIS認證

24.IS 302 (Part 2/Sec202)  Safety of household and similar electrical appliances –Electric stoves 電爐印度BIS認證

25.IS 302 (Part 2/Sec30) Safety of household and similar electrical appliances-Room heaters 房間加熱器印度BIS認證

26.IS 3854  Switches for domestic and similar purposes 用于家用和類似用途的開關印度BIS認證

27.IS 418   Tungsten filament general service electric lamps (upto100 W) 100W內鎢絲燈印度BIS認證

28.694     PVC insulated cables for working voltages up to and including 1100V 1100V及以下PVC絕緣電纜印度BIS認證

29.IS 8144   Multi-purpose dry batteries 多功能干電池印度BIS認證

30.IS 8828   Electrical Accessories-Circuit breakers for overcurrent  protection for household and similar installations 電氣配件 - 用于家用和類似設施的過電流保護用斷路器印度BIS認證

31.IS 9968(Part 1)  Elastomer insulated cables (Part.1): For working voltages up to and including1100 V 彈性絕緣電纜（第1部分）：適用于1100 V及以下的工作電壓印度BIS認證

食品及其產品：

32.IS  15757 Follow–up  formula –complimentary foods  后續配方 - 免費食品印度BIS認證

33.IS 11536 Processed cereal based complementary foods 加工谷物輔食印度BIS認證

34.IS 1165  Milk-powder 牛奶粉印度BIS認證

35.IS 1166   Condensed milk, partly skimmed and skimmed condensed milk 煉乳，部分脫脂和脫脂煉乳印度BIS認證

36.IS 12176   Sweetened ultra high temperature treated condensed milk 加糖超高溫處理煉乳印度BIS認證

37.IS13334 (Part1)  Skimmed milk-powder, standard grade 脫脂奶粉，標準級印度BIS認證

38.IS13334 (Part2)  Skimmed milk-powder, extra grade 脫脂奶粉，特級印度BIS認證

39.IS 13428  Packaged Natural Mineral Water 包裝天然礦泉水印度BIS認證

40.IS 14433   Infant milk substitutes 嬰兒代乳品印度BIS認證

41.IS 14542  Partly skimmed milk powder 部分脫脂奶粉印度BIS認證

42.IS 14543  Packaged Drinking Water (Other than Packaged Natural Mineral Water) 包裝飲用水（包裝天然礦泉水除外）印度BIS認證

43.IS 1656  Milk-cereal based weaning foods  基于牛奶谷物的脫奶食品印度BIS認證

44.IS 3470  Hexane, Food grade 己烷，食品級印度BIS認證

45.IS 14625  Plastic Feeding Bottles 塑料奶瓶印度BIS認證

Diesel Engines 柴油發動機

46.IS 10001  Performance requirements for Constant speed compression ignition (diesel) engines for general Purposes (up to 19 kW)  用于一般用途的恒速壓縮點火（柴油）發動機印度BIS認證

47.IS 10109   Oil pressure stove, offset burner type 油壓爐，偏置燃燒器型印度BIS認證

48.IS 2787    Multi-burner oil pressure stoves 多燃燒器油壓爐印度BIS認證

49.IS 1342  Oil pressure stoves 油壓爐印度BIS認證

Automobiles Accessories 汽車配件

50.IS 13098  Automotive vehicles –Tubes for pneumatic tyres 汽車 - 充氣內胎印度BIS認證

51.IS 15627  Automotive vehicles– Pneumatic tyres for two and three-wheeled motor vehicles 用于兩輪和三輪機動車的充氣輪胎印度BIS認證

52.IS 15633  Automotive vehicles-Pneumatic tyres for passenger car vehicles–Diagonal and radial ply  用于乘用車的充氣輪胎 - 對角線和徑向簾布層印度BIS認證

53.IS 15636  Automotive vehicles- Pneumatic tyres for commercial vehicles-Diagonal and radial ply 用于商業車的充氣輪胎 - 對角線和徑向簾布層印度BIS認證

氣缸，閥門和調節器

54.IS 14899  Liquefied petroleum gas containers for automotive use 汽車用液化石油氣容器印度BIS認證

55.IS 15100  Multifunction valve assembly for permanently fixed liquefied petroleum gas(LPG) containers for automotive use 汽車用永久固定液化石油氣（LPG）容器的多功能閥組件印度BIS認證

56.IS 3196 (Part4)  Welded low carbon steel cylinders exceeding 5 litre Water capacity for low pressure liquefiable gases Part 4 Cylinders for toxic and corrosive gases 焊接低碳鋼瓶超過5升低壓可液化氣體的容量第4部分有毒和腐蝕性氣體的氣瓶印度BIS認證

57.IS 3196 (Part 1) welded low carbon steel gas cylinder exceeding 5litre water capacity for lowpressure liquefiable gases Part1 Cylinders for liquefied petroleum gas (LPG)  用于低壓可液化氣體的低于5升水的焊接低碳鋼氣瓶第1部分液化石油氣（LPG）的氣瓶印度BIS認證

58.IS3196 (Part 2)  Welded elded low carbon steel gas cylinder exceeding 5-litre water capacity for low pressure liquefiable gases Part 2 Cylinders for liquefiable gases other than LPG.低壓可液化氣體超過5升水容量的焊接低碳鋼氣瓶第2部分液化石油氣以外可液化氣體的氣瓶印度BIS認證

59.IS 3224  Valve fittings for  compressed gas cylinder excluding liquefied petroleum gas cylinders 壓縮氣瓶的閥門配件印度BIS認證，不包括液化石油氣瓶

60.IS 3745  Yoke Type Valve Connection for Small Medical Gas Cylinders  用于小型醫用氣瓶的軛型閥連接印度BIS認證

61.IS 7142 Welded low carbon steel cylinders for low pressure liquefiable gases not exceeding 5 litre water capacity 焊接低碳鋼瓶印度BIS認證，用于低壓可液化氣體，不超過5升水容量

62.IS 7285 (Part1)   Refillable Seamless steel gas cylinders Part1 Normalized steel cylinders 可再填充無縫鋼制氣瓶第1部分標準化鋼制氣瓶印度BIS認證

63.IS 7285 (Part2)  Refillable Seamless steel gas cylinders Part 2 Quenched and tempered steel cylinders with tensile strength less than 1100 MPa (112 kgf/mm2) 可再填充無縫鋼制氣瓶第2部分淬火和回火鋼制鋼瓶印度BIS認證，抗拉強度小于1100 MPa（112 kgf / mm2）

64.IS 7302  Valve fittings for gas cylinder valves for use with breathing apparatus 用于呼吸器的氣瓶閥門的閥門配件印度BIS認證

65.IS 7312  Welded and seamless steel dissolved acetylene gas cylinders 焊接和無縫鋼溶解乙炔氣瓶印度BIS認證

66.IS 8737  Valve fittings for use with liquefied petroleum gas cylinders of more than 5 litre water capacity Part 2 Valve fittings for newly manufactured LPG cylinders 用于超過5升水容量的液化石油氣瓶的閥門配件第2部分用于新制造的液化石油氣瓶的閥門配件印度BIS認證

67.IS 8776  Valve Fittings for Use with Liquefied Petroleum Gas (LPG) Cylinders up to and Including 5-Litre Water Capacity 用于液化石油氣（LPG）氣瓶的閥門配件印度BIS認證，最高可達5升水容量

68.IS 9798  Low pressure regulators for use with liquefied petroleum gas (LPG) mixtures 低壓調節器，用于液化石油氣（LPG）混合物印度BIS認證

69.IS 3055 (Part1)  Clinical thermometers :Part1 Solid stem type 臨床溫度計：第1部分實心干型印度BIS認證

70.IS 3055 (Part2)  Clinical thermometers :Part 2 Enclosed scale type 臨床溫度計：第2部分封閉式秤印度BIS認證

71.IS 7620 (Part 1) Diagnostic Medical X-Ray Equipment 診斷醫療X射線設備印度BIS認證

鋼制品：

72.IS 1785 (Part 1)  Plain Hard-drawn Steel Wire For Pre-stressed Concrete: Part 1 Cold Drawn Stressrelieved Wire 預應力混凝土用普通硬拉鋼絲：第1部分：冷拔應力消除線印度BIS認證

73.IS 1785 (Part 2)  Plain hard-drawn steel wire for pre-stressed concrete Part 2: As drawn wire 預應力混凝土用普通硬拉鋼絲第2部分：拉制鋼絲印度BIS認證

74.IS 1161  Steel tubes for structural purposes 用于結構目的的鋼管印度BIS認證

75.IS1239 (Part 1)  Steel Tubes, Tubulars and Other Wrought Steel Fittings - Part 1 : Steel Tubes 鋼管，管材和其他鍛鋼配件 - 第1部分：鋼管印度BIS認證

76.IS 13620  Fusion bonded epoxy coated reinforcing bars 熔融粘合環氧涂層鋼筋印度BIS認證

77.IS 14268  Uncoated Stress Relieved Low Relaxation Seven-ply Strand For Pre-stressed Concrete 預應力混凝土用無涂層應力消除低松弛七股鋼絞線印度BIS認證

78.IS 15391  Cold Rolled Non-Oriented Electrical Steel Sheet and Strip - Semi-Processed Type 以半成品狀態交付的電冷軋非定向鋼板材和帶材印度BIS認證

79.IS 1786  High strength deformed steel bars and wires for concrete reinforcement混凝土的鋼筋和鋼管印度BIS認證

80.IS 2002  Steel plates for pressure vessels for intermediate and high temperature service including boilers 用于中壓和高溫服務的壓力容器，包括鍋爐用鋼板印度BIS認證

81.IS 2041  Steel plates for pressure vessels used at moderate and low temperature  中低溫壓力容器用鋼板印度BIS認證

82.IS 2062 Hot rolled medium and high tensile structural steel 熱軋中高強度結構鋼印度BIS認證

83.IS 277 Galvanized steel sheets ( plain and corrugated) 鍍鋅鋼板（普通和瓦楞）印度BIS認證

84.IS 2830  Carbon steel cast billet ingots ,billets, blooms and slabs for rerolling into steel for general structural purpose 碳鋼鑄造坯錠，鋼坯，鋼錠用于一般結構用鋼再軋板印度BIS認證

85.IS 4270  Steel tubes used for water-wells (upto 200 mm dia) 水井用鋼管印度BIS認證（直徑≤ 200 mm)

86.IS 6003  Indented wire for Pre-stressed concrete 用于預應力混凝土的鋸齒狀鋼絲印度BIS認證

87.IS 648  Cold rolled non-oriented electrical steel sheets and strip-fully processed type (CRNO) 電冷軋非定向鋼板材和帶材印度BIS認證

88.IS 8329  Centrifugally cast (spun) ductile iron pressure pipes for water, gas and sewage  水，氣體及污水流通的離心鑄造（旋轉）球墨鑄鐵壓力管印度BIS認證

89.IS 9523  Ductile iron fittings for pressure pipes for water, gas and sewage 用于水，煤氣和污水的壓力管的球墨鑄鐵配件印度BIS認證

90.IS 3024  Grain oriented electrical steel sheet & strip (CRGO) 方向性電工鋼帶（CRGO）印度BIS認證

變壓器

91.IS 1180 (Part-1)  Out door type Oil immersed Distribution Transformers upto and including 2500 kVA, 33 KV-specification Part 1 Mineral oil immersed 戶外油浸式配電變壓器，最高可達2500 kVA，33 KV規格第1部分浸入礦物油印度BIS認證